---
title: "Oven error code F1 05"
description: "DCS oven error code F1 05: The companion to the code before it, reported about the second board."
url: "https://dcsmiami.support/error-codes/oven-f1-05/"
date_modified: "2026-09-14"
Appliance type: "oven"
---


# Oven error code F1 05

### What F1 05 means on this make

The companion to the code before it, reported about the second board. Two codes describing a failed conversation with two different boards is not redundancy — it tells a technician which half of the oven to open, and on a built-in that is the difference between a morning and an afternoon. As with its companion, the link is suspected before either board is.

### Where this appears, and which table it belongs to

On the appliance’s own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all.

### Which machines this one applies to

wall ovens carrying the decoded F-series table. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 4 of the appliance types this site publishes — bbq grill, cooktop, oven and range — and publishes none at all for bbq grill, beverage center, outdoor kitchen appliance, range and range hood. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door.

### What to do about it

- Clear it at the breaker first: a full minute with the power off, then restore.
- If it returns, note which cavity or which functions are affected. The pattern points at which end of the link to open.
- Ask for the connection to be tested before a board is quoted. Boards on this platform are variant-specific and returning one is not simple.

### Where this goes next

The job this usually becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 526-4714](tel:+13055264714) and describe what the panel is doing before booking anything.

wall ovens carrying the decoded F-series table

What this one means

What F1 05 means on this make

The companion to the code before it, reported about the second board. Two codes describing a failed conversation with two different boards is not redundancy — it tells a technician which half of the oven to open, and on a built-in that is the difference between a morning and an afternoon. As with its companion, the link is suspected before either board is.

Where this appears, and which table it belongs to

On the appliance’s own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all.

Which machines this one applies to

wall ovens carrying the decoded F-series table. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 4 of the appliance types this site publishes — bbq grill, cooktop, oven and range — and publishes none at all for bbq grill, beverage center, outdoor kitchen appliance, range and range hood. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door.

What to do about it

Clear it at the breaker first: a full minute with the power off, then restore.

If it returns, note which cavity or which functions are affected. The pattern points at which end of the link to open.

Ask for the connection to be tested before a board is quoted. Boards on this platform are variant-specific and returning one is not simple.

Where this goes next

The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 526-4714](tel:+13055264714) and describe what the panel is doing before booking anything.

---

**[Read full article: Oven error code F1 05](https://dcsmiami.support/error-codes/oven-f1-05/)**