---
title: "Control board repair cost"
description: "DCS control board repair cost — what control board repair costs on a DCS in South Florida, from $295, and what moves that figure up or down."
url: "https://dcsmiami.support/repair-cost/appliance-control-board-repair-cost/"
date_modified: "2026-09-14"
Appliance type: "Beverage centers, cooktop, oven, range, Range hoods"
---


# DCS control board repair cost

### Why this figure is a from

The board is the part most often blamed and least often the culprit, so most of this figure is the work that rules it in. What is particular here is the published sub-error that fires when the control does not recognize the model it is fitted to — a problem created by an earlier repair rather than by a failure, and one no further replacing will settle.

### What we will not do

We do not quote a repair over the telephone from a description, and we do not publish a final price anywhere on this site. Both are the same rule. On this badge there is a second reason: most of this equipment is set into something a mason built, and until the surround has been seen, half of any estimate is missing. There is a third. Salt does not age two kitchens at the same rate, and a fixing that has seized turns a twenty-minute part change into an afternoon. We would rather establish all of that than guess at a number.

What moves this figure

from $295, and the three things that move it

Masonry and distance from the water are quoted separately — both change the hour

Confirmed on site in writing, and we say when a repair is not worth doing

Whether it is the board or what feeds it

A sagging supply, a chafed harness, a corroded connector or a sensor reporting nonsense all imitate a dead board and cost a fraction of one. Elimination is most of the labor here.

Which sub-error the machine is showing

The published table separates a missing power board from a software error from two different communication failures. They are not the same part and not the same hour.

Whether an earlier repair set the identity wrong

A replacement fitted from the wrong variant leaves a control that will not accept the model it is in. Finding that is quick; finding it after a second board has been bought is not.

Why this figure is a from

The board is the part most often blamed and least often the culprit, so most of this figure is the work that rules it in. What is particular here is the published sub-error that fires when the control does not recognize the model it is fitted to — a problem created by an earlier repair rather than by a failure, and one no further replacing will settle.

What we will not do

We do not quote a repair over the telephone from a description, and we do not publish a final price anywhere on this site. Both are the same rule. On this badge there is a second reason: most of this equipment is set into something a mason built, and until the surround has been seen, half of any estimate is missing. There is a third. Salt does not age two kitchens at the same rate, and a fixing that has seized turns a twenty-minute part change into an afternoon. We would rather establish all of that than guess at a number.

### Why is it a from and not a price?

Because the same job is not the same work on two machines. Outdoors there are two large variables before a part is named: what the machine is set into, and how long the salt has been working on it. Either can change the hour, and a seized fixing can change it more than the component being replaced. The exact cost is confirmed on site, in writing, before anything is opened.

### Is the diagnostic on top of this?

The diagnostic is from $95 and it comes off the repair when you go ahead. Where the finding is that the machine is not worth mending — or that the problem belongs to the gas supply or the building's power rather than to the appliance — you have paid for the answer and not for a part.

---

**[Read full article: Control board repair cost](https://dcsmiami.support/repair-cost/appliance-control-board-repair-cost/)**