Error code
Oven signal Error icon and a beep when the door is opened
DCS oven · the icon is the prompt; the code behind it is the message. This is the panel asking to be read rather than a specific failure. The icon says something has been logged; the code behind it says what.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Signal Error icon and a beep when the door is opened, from the manufacturer's own documentation
This code has no number, because this equipment has no display to put one on. The appliance signals it instead — an alarm, a symbol or a pattern of lights — and what it means is recorded in the documentation that ships with it.
The signal
Error icon and a beep when the door is opened
This is the panel asking to be read rather than a specific failure. The icon says something has been logged; the code behind it says what. On this make that code is decoded rather than bare — the digits after the letter separate a missing board from a software error from a communication error from a model identity mismatch — so the whole string is worth writing down before it clears. A caller who reads us the letter alone has told us almost nothing; a caller who reads the digits has often saved themselves a diagnostic visit.
or call (305) 526-4714
What it narrows down to
An error icon lights on the panel and the machine beeps when the door is opened.
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the wall ovens
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The control cannot see the master power board at all.
The control cannot see the slave power board.
A general software error inside the control.
Communication with the master board has failed.
Communication with the slave board has failed.
The clock board does not support the model identity set on the power board.
The same digits mean different things on different equipment. Search the full code list
In more detail
About Oven signal Error icon and a beep when the door is opened
What the appliance is actually reporting
This is the panel asking to be read rather than a specific failure. The icon says something has been logged; the code behind it says what. On this make that code is decoded rather than bare — the digits after the letter separate a missing board from a software error from a communication error from a model identity mismatch — so the whole string is worth writing down before it clears. A caller who reads us the letter alone has told us almost nothing; a caller who reads the digits has often saved themselves a diagnostic visit.
Where this appears, and which table it belongs to
On the appliance's own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all.
Which machines this one applies to
the icon is the prompt; the code behind it is the message. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 4 of the appliance types this site publishes — bbq grill, cooktop, oven and range — and publishes none at all for bbq grill, beverage center, outdoor kitchen appliance, range and range hood. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door.
What to do about it
- Write the code down in full, including any digits after the letter, before clearing it.
- Power down at the breaker for a full minute and restore. A single occurrence after a storm frequently does not come back.
- If it returns, tell us the whole string when you call. The two digits decide which part is brought to the visit.
Where this goes next
The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 526-4714 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards