Error code
Grill signal The rotisserie will not turn or stay lit
DCS grill · no code is displayed — two systems under one name. Two machines share this name and they fail separately.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Signal The rotisserie will not turn or stay lit, from the manufacturer's own documentation
This code has no number, because this equipment has no display to put one on. The appliance signals it instead — an alarm, a symbol or a pattern of lights — and what it means is recorded in the documentation that ships with it.
The signal
The rotisserie will not turn or stay lit
Two machines share this name and they fail separately. The turning half is a motor, a bracket and a spit carrying a load; the heating half is the rear burner with its own ignition and its own flame supervision. The second of those produces the most misunderstood symptom on the grill: a burner that lights while the dial is held in and goes out the moment it is released is a safety device behaving exactly as designed, because it cannot confirm there is a flame. That is a diagnosis, not something to be worked around.
or call (305) 526-4714
What it narrows down to
The spit does not rotate, or the rear burner dies when the dial is released.
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the grills
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The flame has lost its blue and burns yellow or orange.
Nothing lights, on one burner or on all of them.
Flames rise through the grates whenever anything fatty is cooked.
Gas can be smelled at or around the grill.
The grill lights and runs but will not reach its top temperature.
The hood lights, the dial lighting, or both have stopped working.
The same digits mean different things on different equipment. Search the full code list
In more detail
About Grill signal The rotisserie will not turn or stay lit
What the appliance is actually reporting
Two machines share this name and they fail separately. The turning half is a motor, a bracket and a spit carrying a load; the heating half is the rear burner with its own ignition and its own flame supervision. The second of those produces the most misunderstood symptom on the grill: a burner that lights while the dial is held in and goes out the moment it is released is a safety device behaving exactly as designed, because it cannot confirm there is a flame. That is a diagnosis, not something to be worked around.
Where this appears, and which table it belongs to
On the appliance's own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all.
Which machines this one applies to
no code is displayed — two systems under one name. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 4 of the appliance types this site publishes — bbq grill, cooktop, oven and range — and publishes none at all for bbq grill, beverage center, outdoor kitchen appliance, range and range hood. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door.
What to do about it
- Say which half is failing — turning without heat, heat without turning, or neither. Each goes somewhere different.
- If the spit binds or drags in its bracket, take the load off before running the motor again. A motor fighting a seized bracket does not last.
- Do not hold the dial in to keep the rear burner alight. The supervision that is cutting it off is the part that makes it safe.
Where this goes next
The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 526-4714 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards